R2L – Anti Radiation Chip For Your Mobile.
Protect yourself from mobile radiations!!!
Mobile radiation may be harmful to human health, particularly child’s brain absorbs (2x) times the amount of cellular radiation than an adult. R2L Anti-radiation chip comes to the rescue. R2L is the only product that’s scientifically proven to reduce the radiation coming from your smart phone up to 70% with out impacting the call quality. This patented technology has been proven through rigorous S.A.R testing with “RF Exposure Lab” in California, as well as “Müller BBM” in Germany.
Buy more and save!
|Quantity||1||2 -3||4 -10|
13 in stock
Key Features of R2L Anti-radiation chip for cell phones
- This is the best anti-radiation chip for smartphone that reduces harmful radiations up to 70%.
- It is scientifically approved product and eliminates these radiations without affecting the quality of calls or the way you use your device.
- It also proves its performance by flashing an L.E.D light whenever it absorbs the radiation.
- Works with any model phone or mobile device.
- Easy-to-use peel & place application
Key Benefits (R2L Anti-radiation chip for cell phones)
- It is compatible with every mobile phone. No matter which phone you are using, you can use this chip and protect yourself from the harmful radiations.
- E.D: This is impressive technology which converts the radiations into energy, and that’s why it flashes L.E.D.
- This anti-radiation chip for mobile phone is very easy to use, you have to peel it and apply it your device.
How R2L Anti-radiation chip for cell phones Works
The R2L is an anti-radiation chip designed based on the laws of conservation of energy. It converts the radio frequency emitted from your phone into light energy. This then reduces the amount of Mobile radiation emitted from your phone without compromising call quality and data connectivity.
Why R2L converts radiation to light energy
Imagine cleaning a large water spill on a table with a small sponge. The sponge would become saturated after a point and needs to be drained of the stored water. Unless it is drained the sponge can no longer perform its function.
The R2L uses the LED light to drain the temporarily stored energy so the R2L can collect more energy. That is why the R2L lights up releasing this temporary energy. This cycle continues as long as the cell phone is connected to the cellular network.
R2L reduces mobile phone radiation by 70%
R2L is proven to reduce your exposure to cell phone radiation up to 70%. It has been tested by FCC standard in America, which has a lower SAR limit than Australia. Specific Absorption Rate (SAR) is a measure of the amount of radio frequency energy absorbed by the body when using a mobile phone. So the lower the SAR, the better.
The results of the experiments conducted on R2L are explained the video down below.
How are we different from other products?
Other devices that claim to shield the user from cell phone radiation simply shield or cover the antenna. In order for shields to properly work, the whole antenna would need to be covered, meaning your phone would no longer work. If phone functions are not impacted, it means the energy is being redirected and not expelled. This redirected energy could be entering your hand or head. The R2L does not do this. It reduces radiation in your phone in a harmless manner, which you can observe in real time.
To read more about mobile phone radiation and the R2L click here.
Below is the placement guide for popular devices. For addition info please click here
Frequently Asked Questions
Because of the sleek and thin design of the R2L, you can place it right on top of the case or beneath it. However, a battery charging phone case cannot be used with the R2L.
You can figure out the placement of the R2L for your phone with these simple instructions:Turn your WiFi off on your mobile device.
Stream a video from the YouTube App or website.
Turn the phone around and place the R2L on the back, without taking the adhesive off.
Move the R2L around until the LED lights up the most.
Remove the adhesive and place the R2L where the Led lit up the most.
The R2L does not affect call quality. The R2L absorbs the excess radiation through the antenna of the R2L and converts it through the circuitry into direct current electricity into the LED to light it up and disperse the power safely.
The R2L works on any wireless device that uses cellular, 3G and 4G service to connect to the internet.
The light not lighting up means one of the following has occurred:
-99% of time the light not lighting up is attributed to the R2L being in the wrong position.
-You are too close to a cell phone tower.
-Your Wi-Fi is not shut off. The R2L only works on the cellular signal not on Wi-Fi signal.
No. When the R2L is properly placed, it always lights up, but sometimes flashes so fast or faint that it is impossible to see with the naked eye. Every R2L is tested four times on U.S. and international bands before it leaves the manufacturer.
The FCC has adopted limits for safe exposure to radio frequency (RF) energy. These limits are given in terms of a unit referred to as the Specific Absorption Rate (SAR), which is a measure of the amount of radio frequency energy absorbed by the body when using a mobile phone. The FCC requires cell phone manufacturers to ensure that their phones comply with these objective limits for safe exposure.
The light should be on when radiation is being absorbed.
The light blinks when the R2L is absorbing excess radiation through the antenna and then converting it through the circuitry into direct current electricity into the LED to light it up and disperse the power safely.
The R2L device will last for the life-span of your phone. The average time people have their cell phones is about 18-24 months. You will never have to replace your R2L as long as you have your phone. However, the R2L cannot be re-used once the adhesive is sealed on your phone.
The R2L works on any wireless device that uses cellular, 3G and 4G service to connect to the internet. This device will work on your smart-phone, tablet, ebook reader and laptop. Only one R2L is needed for these devices. Laptop computers, tablets or ebook readers only use the cellular network to communicate when the Wi-Fi is off or not available. Because of this, they typically only use the cellular network when on the move. Unlike cell phones, they only use one antenna so only one R2L is needed because they seldom use the cellular network. The R2L will not light up as often with these devices as with a cell phone.
|Dimensions||8 × 6 × 1 cm|
Qty 1, Qty 2, Qty 4
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.